What information is needed to properly select a metering pump?
1, is the measurement of liquid flow.
2, was measured the main characteristics of liquids, such as chemical corrosion, viscosity and specific gravity.
3, the system's back pressure.
4, the appropriate suction height.
5, the other options needed, such as analog control, pulse control, flow monitoring and timer.
What are the main advantages of electromagnetic driven metering pump?
Electromagnetically driven metering pumps have only one moving part - the armature shaft. Generally, the less moving parts, the more reliable the metering pump works. Metering pump is ideal for low-flow, low-pressure workplaces, and good compensation in the supply voltage fluctuations.
And fixed frequency, change the stroke length of the metering pump, the fixed stroke length, change the frequency of the metering pump What are the advantages?
By calibration, the dosing amount for each stroke is known. The total dosage can therefore be calculated (dosing = dosing per stroke * frequency). The total dosage is linear with frequency (50% frequency = 50% dosing). Through external pulse or analog control, dosage can be transferred from minimum to maximum in one second. In addition, it is much less costly than motor-driven stroke length adjustment.
How to use the performance curve of the metering pump?
1, to find the selected metering pump performance curve corresponding.
2, in the chart below indicate the current back pressure.
3, determine the correction factor, take the bar as the unit of the back pressure value, extending up to the curve, at the cross point vertically to read the correction factor value.
4. Divide the amount of dosing required by the correction factor to give the value in ml / min. Or L / h.
5, put the calculation results in the middle of the dosage scale.
When placing this value on the dosing scale, a ruler can be used to find the stroke length setting and stroke frequency setting.
Cable Tray Roll Forming Machine
Rolling Shutter Machine,Cable Tray Roll Forming Machine,Cable Tray Roll Forming Making Machine,Cable Metal Tray Forming Machine
HEBEI SENUF MANUFACTURE AND TRADE CO., LTD , https://www.senufmetals.com