From the point of view of the petroleum and chemical equipment manufacturing industry, following the good trend of the previous years, the industry's operating performance in 2006, such as industrial added value, sales revenue, profits, and exports, has maintained a rapid growth of over 40%. At the same time, the industry has also made important progress in independent innovation, localization, upgrading and adjustment of product structure, and industrial clusters. The three major petroleum and chemical equipments identified by the Central Government have achieved encouraging results in 2006: Offshore oil and gas projects are equipped with 9,000-meter oil drilling rigs, 300,000-ton floating production and storage tankers, and 300,000 tons of giant oil tankers, etc. ; million tons of ethylene has 640,000 tons / year ethylene cracker compressor, 300,000 tons / year polypropylene loop reactor and 720,000 tons / year ethylene cold box, one million tons of PTA project has a full set of process software packages Successfully developed; coal chemical equipment is equipped with 60,000 air separation, 2,000 tons of coal liquefaction reactors, and the promotion and application of various advanced technology gasifiers.
There is a problem
According to Cai Weici, there is no shortage of hidden dangers in the rapid development of the machinery industry: the revitalization of the main body is weak and unsteady; the growth pattern is not fast; the ability of independent innovation cannot meet the needs of structural upgrading; the bottleneck of the supply of major raw materials is becoming increasingly prominent. In short, the continuous development of the industry's ability to resist risks is still very fragile.
In the oil and chemical equipment manufacturing industry, the level of intelligence and quality of China's oil drilling rigs have yet to be improved. The variety of drilling rigs is relatively single and lacks the design and production capabilities of special drilling rigs. The overall technological level of geophysical exploration and logging equipment is far from the foreign products. There is no competitive advantage in the international market; from the perspective of petrochemical equipment, there is a lack of continuous innovation and the general petrochemical special equipment manufacturing capacity is surplus, while major equipment manufacturing capacity is insufficient. In terms of the industry as a whole, companies generally have weak R&D capabilities, low technical standards, lack of core technologies and high-quality products with independent intellectual property rights, lack of independent innovation capability, disparate research resources, lack of overall planning, and large numbers of companies and small scale enterprises. Respectively, the phenomenon of low-level redundant construction is serious, resulting in a waste of production capacity and a certain degree of disorderly competition in the industry.
In terms of imports and exports, according to Zheng Guowei, director of the Import Office of the former Ministry of Machinery Industry, despite the rapid growth in exports of petrochemical machinery products in China and the gradual increase in surplus in 2006, the situation is very good, but at the same time it should be noted that the current import and export of petrochemical machinery products in China The structure is still not ideal, the proportion of exports of self-owned brands and high-tech products is low, and the proportion of key components, technologies, and technologies for importing major equipment is low.
To this end, the industry must not only continuously update industrial equipment in accordance with current production needs, but also focus on the long-term and make up its mind to strengthen the construction of R&D means, R&D capabilities, and R&D conditions. Not only should we focus on the introduction of technology and talents, we must also be determined to nurture our own core technologies, R&D talents and high-tech talents. Only in this way can our development be based on sustainable development. Our ability to resist risks can have a certain degree of autonomy in today’s international competition.
2007 Outlook
According to Cai Weici, in 2007 the total output value of the industrial machinery industry, industrial added value, and main business income will increase by about 20% from 2006, total profit will increase by about 20%, and total imports and exports will increase by about 20%. For the petrochemical equipment manufacturing industry, according to the prediction of the China Petroleum and Petrochemical Equipment Industry Association, 2007 will be an uncertain year. On the one hand, the world’s oil prices will still change substantially. Even though the current oil price has fallen sharply, the oil As a non-renewable energy source, the general trend of its price rise will not change, and it will be greatly affected by political factors, natural factors and economic factors. On the other hand, China's petrochemical equipment, especially oil drilling equipment, has experienced rapid growth in exports, and most of the export areas are developed countries and regions such as the United States and Canada. Many enterprises’ products are mainly exported, domestic demand is relatively weak, and industries and enterprises are relatively weak. The development of China depends more on the international market, which adds to many uncertainties.
According to the impact of the continuous drop in oil prices since August 2006, so far, the drop in oil prices has not had much impact on the oil drilling equipment industry. The major economic indicators continue to grow rapidly. The number of companies and total investment remains In constant growth. The refining and chemical equipment manufacturing industry is relatively sensitive. Since September 2006, there have been two consecutive losses in loss-making enterprises and total loss. The growth of major economic indicators has slowed down significantly. In 2007, the growth rate of the oil drilling equipment industry is expected to remain at this year's level, that is, the total industrial output value and product sales revenue will increase by more than 65%; the growth of the refining and chemical equipment industry will tend to slow down, and the total industrial output value and products The increase in sales revenue is between 25% and 30%; the increase in pressure vessels is relatively small at around 20%. The growth rate of the whole industry in 2007 could reach approximately 38% to 40%.
Pyrolysis Plant is used for recycling waste tire, waste plastic, waste rubber to fuel oil. According to the actual situation in every country and district, we developed different models of Batch Pyrolysis Plants for waste tires, rubber and plastic with daily capacity 5 -10 tons.
Flowchat of Batch Waste Tyre Pyrolysis Plant
Advantages of Batch Waste Tyre Pyrolysis Plant
1. Full open door design: Speedy loading in and steel pulling out; Easily cooling down after one batch finished, saving time; No leaking with special high temperature flexible graphite packing.
2. Unique Craft Condensers: High condensing efficiency with more oil output. Good quality oil, longer lifetime, and easy to clean.
3. National Patent Unique Smoke Scrubbers: More efficient removal of the acid gas and dust of the smoke by neutralization, purification and absorption, environmental friendly without pollution.
4. National Patent Carbon Black Discharging System: Speedy fully enclosed Auto-discharging under high temperature, avoiding carbon black pollution, saving time.
5. Automatic Submerged welding technology, ultrasonic nondestructive testing, both manual and the automatic safety devices.
6. Sync Gas Recycling System: Fully burned after recycling and utilization, saving fuel and preventing pollution.
7. Direct Heating System: Enlarging heating square to lengthen the lifespan of the reactor and easy to control the temperature.
8. National Patent, unique heat insulation shell; high efficiency temperature keeping, excellent energy-saving effect.
Technical Parameter of Batch Waste Tyre Pyrolysis Plant
|
NO. |
ITEM |
PROJECT |
|
|
1 |
Equipment Model |
XY-7 |
XY-8 |
|
2 |
Door Model |
Full Open Door |
Full Open Door |
|
3 |
Suitable Raw Materials |
Rubber/Plastic Products |
Rubber/Plastic Products |
|
4 |
Structure |
Horizontal Type Revolves |
Horizontal Type Revolves |
|
5 |
Reactor Size |
Φ2200*6000mm Φ2600*6600mm |
Φ2200*6000mm Φ2600*6600mm |
|
6 |
Capacity for One Batch |
5-6Mt; 8-10Mt |
5-6Mt; 8-10Mt |
|
7 |
Oil Yield of Tires |
40%-45% |
40%-45% |
|
8 |
Work Pressure |
Normal Pressure |
Normal Pressure |
|
9 |
Reactor Rotation Speed |
0.4R/M |
0.4R/M |
|
10 |
Fuels Choice |
Coal, Wood |
Coal, Wood, Gas, Oil |
|
11 |
Power |
18KW/H |
18-25KW/H |
|
12 |
Cooling Method |
Water Cycling |
Water Cycling |
|
13 |
Type of Drive |
External Annular Gear |
External Annular Gear |
|
14 |
Heating Method |
Direct |
Direct |
|
15 |
Type of Installation |
With Foundation |
With Foundation/Integrated Base |
|
16 |
Noise dB(A) |
≦85 |
≦85 |
|
17 |
Operation Mode |
Intermittent Operation |
Intermittent Operation |
|
18 |
Total Weight(MT) |
25-40 |
25-40 |
|
19 |
Installation Space Required |
30m*10m |
30m*10m |
|
20 |
Manpower |
3~4/batch |
3~4/batch |
|
21 |
Shipment |
Ф2200×6000=1*40HC+1*40FR Ф2600×6600=2*40HC+1*40FR |
Ф2200×6000=1*40HC+1*40FR Ф2600×6600=2*40HC+1*40FR |
Waste Tyre Pyrolysis Plant
Waste Tyre Pyrolysis Plant,Pyrolysis Plant ,Tyre Pyrolysis,Tyre Recycling
Shangqiu Jinpeng Industrial Co., Ltd. , https://www.recyclingthewaste.com