Wood Charcoal Sawdust Rice Husk Continuous Carbonization Furnace, Carbonization Stove

Model NO.: GMEC
Clour: Client Requirement
Capacity: 300-2000kg\H
Key Word: Carbonization Furnace
Key Word 1: Wood Charcoal Carbonization Furnace
Trademark: Runxiang
Transport Package: Container
Specification: 20 container
Origin: Henan

Continuous Horizontal Sawdust Rice Husk Carbonization Machine

 
Continuous Horizontal Sawdust Rice Husk Carbonization Machine used for deal with small size raw material;such as;sawdust,rice husk,Wood chips,jute stick,coconut shell which after crushing,this is new technology and environment friendly charcoal processing machine,with control cabinet
 
 Wood Charcoal Sawdust Rice Husk Continuous Carbonization Furnace, Carbonization Stove

Continuous Horizontal Sawdust Rice Husk Carbonization Machine Working Process 
1 if with the Gasifier,first some raw material;such as sawdust,rice husk,and etc,about 100-200kg/time,burning material in gasifier,producing Combustible gas,the put material to carbonization furnace
 Wood Charcoal Sawdust Rice Husk Continuous Carbonization Furnace, Carbonization Stove

2;If without gasifier,we suggest use natural gas,liquefied gas to burning and heating
carbonizatino furnace,It's more clean and environmental protection than use gasifier,
heating the furnace about 40minutes to 1 hour,the working temperature is increasing
 Wood Charcoal Sawdust Rice Husk Continuous Carbonization Furnace, Carbonization Stove

3;For different raw material,we suggest different temperature to put raw material
For low density material;such as sawdust,rice husk and jute stick,put material to
carbonization furnace when temperature reach 300ºC,but highest carbonization temperature can't higher then 400-450ºC,
For high density material;such as coconut shell,palm kernel shell,when temperature reach
380-400ºC put material into carbonization furnace,carbonizing temperature is 450-500ºC,
Highest carbonizing temperature can't higher then 600ºC.
 Wood Charcoal Sawdust Rice Husk Continuous Carbonization Furnace, Carbonization Stove

4; carbonizing time about is 20-30 minutes,we match two pcs screw conveyor for carbonization
Furnace's top and end to conveying material to carbonization furnace
 
 
Raw Material and Final Product
Raw material size as;sawdust,rice husk,just stick,coconut shell,palm kernel shell and etc,
Input raw material size need less then 5cm,humility need less then 10%,if material
humility higher 10%,it need first before carbonizing,
For low density material,suck as rice husk,sawdust,jute stick,about 3.1-3.2 tons raw material
could get 1tons charcoal,for high density raw material;such as coconuts shell,palm kernal shell,
About 2.6-2.7tons material could get 1 ton charcoal,
 Wood Charcoal Sawdust Rice Husk Continuous Carbonization Furnace, Carbonization Stove

 Continuous Horizontal Sawdust Rice Husk Carbonization Machine 
For different material, this machine have different capacity
Low density raw material;rice husk,sawdust,jute stick,and etc
High density;raw material;coconuts shell.hard wood powder,palm kernal shell and etc
              Carbonization furnace body;diameter X length  unit;meter
  1m x 8m 1m x 12m 1.2m x 8m 1.2 x 12m
Low density 300-500kg/h 500-800kg/h 1000-1200kg/h 1200-1500kg/h
High density 600-800kg/h 800-1200kg/h   1200-1500kg/h 1500-2000kg/h
For example;carbonization furnace body diameter 1m.length 8m,It could deal with low density
material about 300-500kg/h ,deal with high density material 600-800kg/h
 
Other technical date for this machine
1;Output raw material temperature;50ºC.
2;Main carbonization furnace max temperature;800ºC.
3;Heating furnace max temperature could reach 1200ºC.
4;Carbonization furnace rotate speed is 3r/minute,It's adjustable
5;Carbonizing temperature is 20-30 minutes,from input raw material to out put charcoal
 
 

Port Crane Series

Port Crane Series,Harbour Crane ,Tower Crane ,Mobile Crane

Overhead Crane Co., Ltd. , http://www.nbcraneseries.com