*Adopting PWM control technology,constant current,accurate current control.
*High frequency arc starting,no matter the current is high or low,the arc starting rate high.
*DC AC tig aluminium welding machine steady welding current,esthetic shaping of welding seam.
*Adjustable pulse current and pulse frequency, apply to many kinds of welding technology.
*ACDC tig welder one machine serves several purposes,saving the welding cost.
*The machine can automatic welding,Optional cycling water tank.
*Can be used to weld aluminium, stainless steel,carbon steel,alloyed steel,copper,titanium etc.Â
| Model: | AC DC TIG-315Â |
| Input power Voltage Frequency(V,Hz): | AC380(three phase)±15%,50/60 |
| Rated input power capacity(KVA): | 8.9 |
| No-load voltage(V): | 45 |
| Output current range.(A):  | 20-315 |
| Rated output voltage(V): | 22.6 |
| Duty cycle (%)(25ºC): | 60 |
| No-load loss(W): | 40 |
| Arc-starting: | HF |
| Efficiency(%):Â | 85 |
| Power factor (COSφ): | 0.93 |
| Insulation class: | F |
| Weight(KG): | 34 |
| Overall dimension(mm): | 560×364×430 |
| Case protection degree: | IP21S |
| Pre-flow time(s): | 0-2 |
| Duty ratio(%):  | 20-8 |
| Current down-slope time(s): | 0-5 |
| Post-flow time(s): | 2-10 |
| Remote interface: | with |
| AC welding thickness(mm):     | 0.8-10 |
 ACDC tig aluminum welding machine product Characteristics:
*Adopting PWM control technology,constant current,accurate current control.
*High frequency arc starting,no matter the current is high or low,the arc starting rate high.
*DC AC tig aluminium welding machine steady welding current,esthetic shaping of welding seam.
*Adjustable pulse current and pulse frequency, apply to many kinds of welding technology.
*ACDC tig welder one machine serves several purposes,saving the welding cost.
*The machine can automatic welding,Optional cycling water tank.
*Can be used to weld aluminium, stainless steel,carbon steel,alloyed steel,copper,titanium etc.Â
| Model: | AC DC TIG-315Â |
| Input power Voltage Frequency(V,Hz): | AC380(three phase)±15%,50/60 |
| Rated input power capacity(KVA): | 8.9 |
| No-load voltage(V): | 45 |
| Output current range.(A):  | 20-315 |
| Rated output voltage(V): | 22.6 |
| Duty cycle (%)(25ºC): | 60 |
| No-load loss(W): | 40 |
| Arc-starting: | HF |
| Efficiency(%):Â | 85 |
| Power factor (COSφ): | 0.93 |
| Insulation class: | F |
| Weight(KG): | 34 |
| Overall dimension(mm): | 560×364×430 |
| Case protection degree: | IP21S |
| Pre-flow time(s): | 0-2 |
| Duty ratio(%):  | 20-8 |
| Current down-slope time(s): | 0-5 |
| Post-flow time(s): | 2-10 |
| Remote interface: | with |
| AC welding thickness(mm):     | 0.8-10 |
Â
1.Model No. Ridge Cap Roll Forming Machine
2.thickness:0.3-0.5mm
3.Coli material:PPGI
4.The bearing capacity of manual decoiler:5 tons
5.shaft material:45#steel
6.Out diameter :60mm
7.numbers of forming steps:11 stations
8.transmission:chain transmission
9.Forming speed:2-3m/min
10.main motor power:3kw
11.voltage:380V50HZ Three-phase
12.dimension:6.2*1.1*1.55
13.cutting:Hydraulic cutting
14.blade material:Cr12 steel with quenched treated 60-62°c
15.control system:PLC(Delta)
16:length tolerance:±2mm
17.weight:4.8t
18.spare parts
1 easy damaged parts: conk 2pcs, fuse-link 4pcs
2 rubber mat: 1 pcs
3 bolt spanner: 1 pcs
The whole line including: Manual decoiler, Roll Forming Machine, hydraulic station,
hydraulic cutter, PLC control system, run-out table.
Ridge Cap Roll Forming Machine
Ridge Cap Roll Forming Machine,Ridge Cap Machine,Ridge Cap Forming Machine,Ridge Cap Making Machine
Hebei Feixiang Roll Forming Machinery Co,.Ltd , http://www.steelrollformingmachines.com