Â
First, place the circulation tank of self-cleaning sterilizer to the lower middle part of the water tank so as to guarantee the even circulation of the tank water. When the water level reaches the designed top limit, the electric control cabinet starts up the high-voltage power and the strongly-oxidized gas generated by the immersible pump flows through the pipeline to the aeration section to aerate-disinfect the water, and at the same time, the immersible pump sends the disinfected water back into the water tank to circulate the stagnant water. Thus water circulation continues until thorough disinfection is completed and the water quality is guaranteed. Before delivered off the factory, the time for this product has been set without resetting by the user.
Categorization of Products
1. Water-tank ozone self-cleaning disinfector
2. Water-tank micro-electrolysis self-cleaning disinfector
Working principle for the water- Tank ozone self- Cleaning disinfector:
It functions the way that the oxygen goes through the high-frequency electric field and becomes ozone to be mixed in time with the water and that the strong oxidizing effect of ozone can kill the bacteria in the water. The optimal density in which bacteria are killed can be regulated by changing the pressure of the incoming water, amount of ozone and current, As the ORP of ozone in water is 2.07V, which is higher than 1.36V of chloride, only when the ozone content is 1/1 0000 of the chloride, the bacteria-killing effect is 600-3000 times better than chloride and other disinfectants, and the bacteria can be killed within several seconds.
Applicable Range
The water-tank self-cleaning disinfector has been widely used in such water storage areas as high level cisterns, water storage tanks, living water tanks, clean water pool of sewage treatment works, fire water tanks, fountain springs, waterscape cistern, swimming pools and the water storage pools for such industries as aquatic products, aquaculture, oceanic world and food and beverage.
| Â Â Model |
Volume adaptable for water tanks (pools) | Â Â Power (W) |
|
| Used for disinfection of secondary water supply (m³) | Used for first water tanks (m³) |
||
| WTS-10 | 10-30 | 10-50 | 280 |
| WTS_20 | 30_60 | 50_80 | 350 |
| WTS_30 | 60_150 | 80_200 | 480 |
Â
First, place the circulation tank of self-cleaning sterilizer to the lower middle part of the water tank so as to guarantee the even circulation of the tank water. When the water level reaches the designed top limit, the electric control cabinet starts up the high-voltage power and the strongly-oxidized gas generated by the immersible pump flows through the pipeline to the aeration section to aerate-disinfect the water, and at the same time, the immersible pump sends the disinfected water back into the water tank to circulate the stagnant water. Thus water circulation continues until thorough disinfection is completed and the water quality is guaranteed. Before delivered off the factory, the time for this product has been set without resetting by the user.
Categorization of Products
1. Water-tank ozone self-cleaning disinfector
2. Water-tank micro-electrolysis self-cleaning disinfector
Working principle for the water- Tank ozone self- Cleaning disinfector:
It functions the way that the oxygen goes through the high-frequency electric field and becomes ozone to be mixed in time with the water and that the strong oxidizing effect of ozone can kill the bacteria in the water. The optimal density in which bacteria are killed can be regulated by changing the pressure of the incoming water, amount of ozone and current, As the ORP of ozone in water is 2.07V, which is higher than 1.36V of chloride, only when the ozone content is 1/1 0000 of the chloride, the bacteria-killing effect is 600-3000 times better than chloride and other disinfectants, and the bacteria can be killed within several seconds.
Applicable Range
The water-tank self-cleaning disinfector has been widely used in such water storage areas as high level cisterns, water storage tanks, living water tanks, clean water pool of sewage treatment works, fire water tanks, fountain springs, waterscape cistern, swimming pools and the water storage pools for such industries as aquatic products, aquaculture, oceanic world and food and beverage.
| Â Â Model |
Volume adaptable for water tanks (pools) | Â Â Power (W) |
|
| Used for disinfection of secondary water supply (m³) | Used for first water tanks (m³) |
||
| WTS-10 | 10-30 | 10-50 | 280 |
| WTS_20 | 30_60 | 50_80 | 350 |
| WTS_30 | 60_150 | 80_200 | 480 |
Tower Crane Control Console (also called Tower Crane Linkage Console, Tower Crane Joysticks, Joystick Master Controller ) is mainly used to control the starting, speed adjusting, braking and reversing.
BQ Tower Crane Controller Joystick adopts the controlling system of F0/23B,H3/36B, which can be widely used for tower cranes of all kinds of specifications and conditions.
Each mechanism of the product can be equipped with potentiometer and encoder, and the voltage,frequency and speed of motor can be controlled by matched electrical system.
It is also can made up with metal cover or other hoisting console model according to the customers' requirement.Operation system sets 0 self-lock and self reseting device for working safety and reliability.
Each part of the system can additional installed potentionmeter and encoder,through the assorted electronic control system to pressure regulating, frequency conversion,AC speed regulatin to control the speed. We provide all kinds of joysticks for different type tower crane.
BQ has more than 15 years tower crane experience. We will supply you best professional advice. 24 hours customer service give you quickly feedback.
Tower Crane Controller Joystick,Tower Crane Joysticks,Tower Crane Linkage Console,Joystick Controller,Joystick Master Controller
SHEN YANG BAOQUAN BUSINESS CO., LTD , https://www.sytoplesstowercrane.com