Mine water disaster emergency rescue plan and implementation

(I) General requirements 1. Mining enterprises and mines shall formulate water disaster emergency plans and on-site disposal plans according to the main types of water hazards of the unit and possible water hazard accidents. The content of the emergency plan should be targeted, scientific and operative. The disposal plan shall include specific measures such as the safe evacuation of personnel when unforeseen water damage accidents occur.
2. Mine management personnel and dispatching room personnel should be familiar with the water disaster emergency plan and on-site disposal plan.
3. The mine should be equipped with a safety exit, stipulate a route to avoid flooding, set a clear road marking with a reflective film, and familiarize all employees so that once the water breaks out, it can be safely evacuated to avoid accidental accidents.
(II) Water Situation Report and Water Condition Handling 1. The operator who discovers the water situation on the spot shall immediately report the water inrush location and water condition to the mine dispatching room, and notify the surrounding personnel to evacuate to a safe place or raise the well.
2. After receiving the water situation report, the mine dispatching room shall immediately start the mine water disaster emergency plan, determine the safe evacuation route of the personnel according to the direction, location and water volume of the incoming water, and notify the personnel in the affected area of ​​the well to evacuate immediately. The safety location or the well is reported to the person in charge of the shift and the main person in charge of the mine, and the flood situation is notified to all surrounding mines.
3. When water inrush occurs, the mine should immediately prepare to close the waterproof gate, and then close the waterproof gate after confirming that all personnel have been evacuated.
4. The mine should adjust the underground ventilation system in time according to the degree of impact of the flood to avoid wind flow disorder and harmful gas overrun.
5. After the occurrence of a water hazard accident, the mine shall report to the relevant government departments in accordance with relevant regulations, and shall not report late, report, report or report.

it  is full range of valve parts   for the following type :

AAA) YANMAR DIESEL ENGINE     
K(D)L, KFL-T, 6MAL-H/T/HT/DT, S165-T/ST/EN,     
S185-ST/UT/ET, M200L-UN/SN/EN/M220L-UN/SN/EN / N 330 

     
BBB) DAIHATSU DIESEL ENGINE     
PS22/26/ DS18(A)/ DS(B)22/

DL20/22/28/ DK20   / DK 28 
     
CCC) NIIGATA DIESEL ENGINE     
 6L(M)25BX/6M28AFTE/BX/6M31X/EZ/EX/  31AFTE  /34AGT   
     
DDD) AKASAKA      
AH30/AH38/ AH40/D/F/  A31/34/37/41/ DM28/30/33/36/38/40(A)K/ DM46/  UEC37H-HB/ UEC 37/88H     
UEC 37LA/ UEC45LA/ UEC52LA/ UEC52HA/ UEC60HA/  UEC60LS/ UEC45HA/115 ALL UET TYPE     
     
EEE) MITSUBISHI    (KOBE AND AKASAKA ) 
45/75C/ 45/80D/ 52/90D/ 52/105D.E/

UEC37H-IIB/ UET37/88HA/UEC45HA.LA/ UEC52HA.LA/ S6B/      
ETC     
     
FFF) HANSHIN     
6LU(D)26/ 6LU(N)28A/ 6LU(D)32/6LU(D)35/ 6LU(S)38/ 40 / 6LU40/ 6LU46A/ 6LU50A/

6EL30/ EL(S)32     /6EL(S)35/ 6EL38/ 6EL40/ 6EL(S)44/50A/     

GGG) MAN B&W     
S35MC/L35MCE/L50MCE/ L60MCE/ 40/54A     
     
HHH) MITSUBISHI PURIFIER     
SJ700~SJ1800/SJ 2000


III)SULZER 

 RND 68 RND 76 RD 44



JJJ) MAKITA

GSLH – 633 637                 KSLH -633 637



Kkk) PIELSTICK

PC 2-5  PC 2-6


Engine Valve

Engine Valve,Valve Engine,Engine Exhaust Valve ,Car Engine Valves

ZhouShan HeCheng Machinery Co., LTD. , http://www.hcmarineparts.com