Heavy Duty HOWO Lifting Lorry 10 Ton Crane Truck
Lorry crane truck, also known as a crane truck, is a lifting equipment that allows for the raising and lowering of goods. It typically uses a hydraulic lift and telescopic system, and is usually mounted on a truck.
The Specification of Crane Truck:
| I. Main specifications for 8 tons crane | |||||||||
| Total weight (Kg) | 11950 | Driving type | 4 x 2 Direct drive transmission | ||||||
| Payload (Kg) | 4505 | Overall dimension (mm) | 7650×2500×3550 | ||||||
| Curb weight (Kg) | 7250 | Box internal dimension (mm) | 4450×2294×550 | ||||||
| Cab seats (man) | 2 | Front/Rear Suspension (mm) | 1320/2130 | ||||||
| Approach/departure angle (°) | 22/10 | Wheelbase (mm) | 4700 | ||||||
| Number of axles | 2 | Max speed (Km/h) | 90 | ||||||
| Axle load (Kg) | 3400/8550 | Tire specification | 8.25-20, 7 pieces | ||||||
| Engine | 170hp | Transmission | Manual, 6 forward & 1 reverse direct drive transmission | ||||||
| II. Crane specification | |||||||||
| Â | Â Â Â Â Â | Â | Â | ||||||
| Crane weight (kg)(kg) | 2160 | Max lifting weight (kg) | 6300 | ||||||
| Max. Lifting moment (T.M)(T.M) | 15.7 | Recommended power (kw) | 20 | ||||||
| Max. Oil Flow of Hydraulic System (L/min) | 40 | ||||||||
| Max. Pressure of Hydraulic System (MPA)(MPA) | 20 | ||||||||
| Oil Tank Capacity (L) | 90 | ||||||||
| Installation Space (mm) | 900 | ||||||||
| Rotation Angle (°)(°) | 360° all rotation | ||||||||
| Working Radius (m) | Arm Extension (m)/Max. Lifted Load (kg) | ||||||||
| 4.02 | 6.37 | 8.72 | |||||||
| 2.50 | 6300 | Pinion Shaft Housing Assembly CH/CS Cone Crusher
(1) CH/CS Cone Crusher is a single cylinder hydraulic structure. The equipment is designed according to heavy-duty working conditions. The main shaft is supported at the upper and lower points, and the stress conditions are good.
(2) The constant crushing chamber (CLP) design keeps the feeding and production capacity constant during the liner wear cycle, significantly reducing the operating cost.
(3) Up to ten kinds of cavity shape changes and up to four kinds of eccentricities can be set for an eccentric sleeve bushing, which greatly enhances the flexibility and adaptability of the equipment.
(4) Equipped with intelligent ore outlet adjustment system ASRI, the performance of the crusher can be maximized.
(5) Advanced liner wear monitoring and automatic compensation functions, operation data record query functions, and convenient network communication functions can significantly improve the maintenance level of equipment and optimize the coordination and control with other equipment in the system.
(6) Compared with CH type, CS type crushing chamber is higher and steeper, with larger feed inlet and larger carrying capacity. It is suitable for secondary crushing when the feed particle size is large. Its lower frame is interchangeable with CH crusher of the same specification. Pinion Shaft Housing Assembly,Pinion Shaft Housing,Sturdy Seal Parts,Adjusting Pinion Shaft Bearings Shenyang Ule Mining Machinery Co., Ltd , https://www.ulecrusherparts.com | |||||||