Baoding BD95W-9A Upgrade Model 95 Grabber Model Listing Official Product Introduction

This is a new generation of multi-functional wheel grabber model BD95W-9A grabber (temporary model), a new generation of wood grab continues the energy-efficient characteristics of Baoding wood machine manufacturers, in the design of the A number of improvements and upgrades are the main grabber models that Baoding wood machine makers will prepare for listing in 2018.

新一代95型号抓木机
A new generation of 95 model wood catcher

A new generation of model 95 wood grabbers has undergone some improved designs from the exterior design painting, giving people a first impression that they are bigger and taller. Don't look at this model with a weight of 7.8 tons, but it is used in the design of the whole machine. The configuration requirements and construction of the taller one model are more robust and can fully adapt to a variety of harsh working conditions, and are more in line with the title of wheeled mechanical generalist.

新一代95型号抓木机
BD95W-9A type

The BD95W-9A getting off part continued the design of the cash car, but it was more reasonable in the layout of the piping components, strengthened the solidity of the components in the traveling transmission, reduced the failure rate of the wheeled equipment, and reliability. improve.

BD95W-9A型下车部分
BD95W-9A getting off part

The whole car cover adopts molded integrally molded parts, which gives a beautiful and atmospheric feeling. The prominent body has energy-saving and environmentally friendly labels and meets the latest environmental emission requirements.

全车覆盖件采用了模压一体成型部件
Full-vehicle cover using molded integral parts

The Yuchai four-cylinder EFI engine is equipped with a turbocharger with a rated power of 55 kilowatts and a rated speed of 2200 r/min. It meets the national emission requirements and the operating performance and working conditions have been significantly improved.

玉柴四缸电喷发动机
Yuchai 4-cylinder EFI engine

The imported variable displacement piston pump system that still uses the cash models is perfectly matched with the engine output power, and the operating fuel consumption at the same time has been reduced to a certain extent. The control main valve layout is intuitive, neat, and tidy for easy maintenance.

进口变量柱塞泵系统
Import variable plunger pump system

The work equipment gripper part has been related to optimization, optimization of the arc shape of the gripper is more convenient for the improvement of the efficiency of the assembly work, and the rotary motor adopts the imported parts. The bucket's standard brick 0.35m3 is fully reinforced with a 4-tooth design.

工作装置抓具部分已经进行了相关优化
Work device gripper section for relevant optimization

The working arm has been redesigned with a reinforced design to increase the strength and durability of the arm at the end of the mechanism to prevent bruising, and the large and small arms have also been reinforced.

The LED work lights are arranged on the right and left of the boom, which increases the pre-lighting of the night work and the external installation of metal protection devices.

动臂左右配置了LED工作灯
Right and left arm with LED work light

Increased the number of side doors, circuit insurance and other components concentrated in the rear of the cab to facilitate the daily maintenance work, increase the number of oil-water separators and precision filters to effectively protect the power output section, the air filter parts of the vehicle used a high-end Liejia brand. Battery to increase the power switch When the device is not working for a long time can cut off the power to prevent battery loss.

新款95抓木机主要数据介绍
The new 95 wood grasping machine main data introduction

座椅采用了多级调节悬浮式设计
Seat adopts multi-level adjustment suspension design

The cab follows the old design seat with a multi-stage adjustable suspension design that effectively relieves the driver of fatigue. A control device can be seen under the seat to adjust the comfort level according to different body weights. The use of a 5-inch full LCD display, display more intuitive clarity is better, using the electronic control aids design and flexible operation. The control panel focuses on the control under the steering wheel. (This article comes from Baoding Machinery)

Related news: Baoding grab wood machine excavator

Deep Groove Ball Bearings

Deep groove ball bearing:

All bearings are essentially rolling devices that enable an object to move by reducing friction between that object and the surface it is moving over. The principle is that all objects taper roller bearing 1/8 inch 1 ball bearing are able to roll far better and faster than they slide.

Deep groove ball bearings are suitable for high speed and even extremely high speed, and very durable, without constant maintenance.These bearing small friction coefficient, high limit speed, size range and variety in form, used in precision instrument, low noise motors, automobiles, motorcycles and general machinery and other industries, is the most widely used type of bearings in machinery industry.The main bearing is radial load, which can also bear a certain amount of axial load.

Deep Groove Ball Bearings,Miniature Ball Bearings,Small Ball Bearings,Pillow Block Bearings

ZHEJIANG XCC GROUP CO.,LTD. , https://www.xccbearing.com