On October 12th, in the framework of the reactor-core reactor in the construction of the Saudi Ethylene Glycol Plant, a 350-ton reaction gas bag was successfully hoisted into place. At this point, a total of 8 large-scale equipments were installed in the framework. The lifting task has been successfully completed by 7 sets. At the same time, this piece of equipment is also the heaviest piece of equipment lifted by the Ministry of Mechanization Engineering Company Saudi Arabia glycol large equipment lifting department as of the end of the 3600 tons crane.
The high-pressure reaction gas bags for lifting this time, also called steam reactors, total two units, respectively, located above the two kilotons of the reactor in the reactor frame. Their main role is to provide fixed heat sources for the following reactors. In order to maintain the temperature of the reactor, it is the core device of the glycol device.
The hoisting uses a single 750-ton crawler crane for hoisting. The crane uses a 56-meter-long SDWVB and 14-meter SDWVB tower working condition. The 750-ton crane lifts the equipment to a height of 40 meters, and then rotates the boom to penetrate the reactor frame. In the top of the steel structure, finally with the crane and the hoisting staff slip rope, the equipment is slowly on the basis of the lifting process lasted 1 hour and 10 minutes.
Before hoisting, the large-scale equipment lifting department of the Second Construction Mechanization Co., Ltd. shall ensure safety and reliability, continuously optimize the hoisting plan, and timely connect with the relevant installation units, which places will affect the hoisting, and where the steel structure can not be on, accurate calculation and meticulous The elimination of all uncertainties before the hoisting began, finally ensured the safety of this lifting.
The high-pressure reaction gas bags for lifting this time, also called steam reactors, total two units, respectively, located above the two kilotons of the reactor in the reactor frame. Their main role is to provide fixed heat sources for the following reactors. In order to maintain the temperature of the reactor, it is the core device of the glycol device.
The hoisting uses a single 750-ton crawler crane for hoisting. The crane uses a 56-meter-long SDWVB and 14-meter SDWVB tower working condition. The 750-ton crane lifts the equipment to a height of 40 meters, and then rotates the boom to penetrate the reactor frame. In the top of the steel structure, finally with the crane and the hoisting staff slip rope, the equipment is slowly on the basis of the lifting process lasted 1 hour and 10 minutes.
Before hoisting, the large-scale equipment lifting department of the Second Construction Mechanization Co., Ltd. shall ensure safety and reliability, continuously optimize the hoisting plan, and timely connect with the relevant installation units, which places will affect the hoisting, and where the steel structure can not be on, accurate calculation and meticulous The elimination of all uncertainties before the hoisting began, finally ensured the safety of this lifting.
JIS B 8241 Steel Gas Cylinders
Hangzhou Tianlong Steel Cylinder Co., Ltd. , http://www.hzgascylinder.com