Huizhou street lights enter the LED era, the annual energy saving period

Core Tip: On July 4th, streetlight installers worked on Huizhou Avenue, replaced street lampposts, and installed brand new LED streetlights. According to the introduction of the Municipal Urban Lighting Management Office, in addition to the replacement of Huizhou Avenue, Huizhou City has basically completed the replacement of LED street lamps before the end of last year. In 2012, Guangdong Province issued the “Implementation Plan for Promoting the Use of LED Lighting Products in Guangdong Province”, requiring all new projects in the public lighting field of the province to adopt LED lights, and the non-LED lighting products originally used in the Pearl River Delta region should be completed in batches. In September 2013, Huizhou City held a promotion meeting to promote the application of LED lighting products. At the meeting, Huizhou City needed to renovate (newly built) a total of 87,623 public lighting lamps. The Huizhou Public Utilities Administration and most of the counties or districts of the counties (districts) have completed bidding or bidding. Before the end of 2013, all street lights in the city will be replaced with LED street lights. At the same time, according to the spirit of the relevant documents of the provincial government and the municipal party committee and municipal government, since October 2012, all new street lamps in Huizhou City must be equipped with LED street lights. The replacement work was basically completed at the end of last year, with the exception of Huizhou Avenue. According to Xu Junping, deputy director of the Municipal Urban Lighting Management Office, the Huizhou road was basically replaced with LED street lights at the end of last year. The poles of Huizhou Avenue have been used for more than 10 years and need to be replaced. Due to technical and formalities, the replacement is only delayed until recently. How much electricity can LED lights save? Some media have estimated that the annual power saving is more than 50. Yesterday, the street lamp installation staff is installing lampposts and lamps on the green belt of Huizhou Avenue. According to reports, the number of street lights in each section is not the same, mainly divided into inside and outside sidewalks and green belts. The original street lamp on the green belt is 400 watts, which will be replaced with a 150 watt LED street light. In theory, it will save 62.5. Last year, there were media estimates. After nearly 90,000 street lamps were replaced with LED street lights, they will save more than 50 per year. Electricity. The total street lights and landscape lights in the main city area are estimated to be about 60,000 baht. After replacing with LEDs, the annual electricity consumption is 46.27 million kWh, and the annual electricity saving is 39.334 million yuan. In this regard, Xu Junping said that the specific energy-saving data has not yet been counted and cannot give an answer, but is preparing to invite professional institutions to calculate. What do people think about LED street lights? The light is soft and the fog is dim. According to reports, traditional street lamps often use high-pressure sodium lamps, which cause huge energy waste due to their large light loss. LED street lights have become the best choice for energy-saving renovation of road lighting with the advantages of directional illumination, low power consumption, good drive characteristics, fast response, high seismic resistance, long service life and environmental protection. Ms. Hu, a member of the public, believes that the LED street lights emit soft white light, and the road surface looks natural. The objects will not appear yellow like the old street lights. The driver, Mr. Liu, believes that in the case of rain and fog, the LED street light is equivalent to not being turned on. In addition to the light that can be seen, the road will appear dim. In this regard, Boluo LED lamp manufacturers have confirmed that LED street lights use white light, penetrability is not as good as yellow light, and the rain and fog weather is relatively poor.

The machine is used for cutting long tubes for scaffold vertical pole, after cutting the pipe ends with a smooth blade, without burr, which reduces manual grinding. It can load and unload the tube automatically, so it reduces work intensity.

Description of ringlock scaffolding Cutting Machine

 

Advantage: no burr after cutting

Guarantee time: 1 year

MOQ: 1 set

OEM service: offered

Payment: T/T. L/C

Delivery: Tianjin port

 

 

FAQ:

Q: Can you customize the machine according to our workpiece requirement?

A:Yes, we can design the machine after you give us the technical drawing.

Q: How about payment terms?

A: 30% TT as deposit, 70% TT paid before shipment or against B/L copy.

Q: Installation and commissioning?

A: We will send our engineer for installation and commissioning

Q: Do you have some videos to show how the machine works?

A: Yes, we can provide some videos for reference.

Ringlock Scaffolding Cutting Machine

Ringlock Scaffolding Cutting Machine,Efficiency Scaffolding Cutting Machine,Efficiency Scaffolding Cutting Equipment,Efficiency Scaffolding Standard Cutter

RENQIU JINSHI WELDING MACHINE CO., LTD , http://www.scaffoldwelder.com